查看: 915|回復: 5

New Comer

[複製鏈接]
發表於 16-7-2015 10:37:27 | 顯示全部樓層 |閱讀模式

馬上註冊,結交更多好友,享用更多功能,讓你輕鬆玩轉社區。

您需要 登錄 才可以下載或查看,沒有帳號?立即註冊

x
本帖最後由 ClarenceChi@FB 於 16-7-2015 11:25 編輯

Hi Bros & Sis,

New joined member.  I got my second hand Mark X 250G (120) just less than a week.  But I got a question on the sequential gear box.  Every time I switch from auto to manual, the screen shows that it's in gear 4, of course actually it may not be.  And if I am running the car in a higher gear and brake, it does not automatically step down to lower gear shown on the screen although actually it is going down.  I have to manually lower the gear or else it will just like full auto and slowly catch up to the earlier gear that I was in when I step on the gas pedal.  Is it normal or is there any problem with the gear box or the computer?

Thanks in advance for giving advices.
發表於 16-7-2015 14:48:04 | 顯示全部樓層
Hi, Welcome to join our forum.

Actually the Mark X gear box is a full auto gear box with +/- changeable shift. The number you see on the screen is showing that the highest gear it can be use. But it does mean it is using that gear. For example, when you change the gear selection from D to +/-, for 120 model build after 2006, it will shown number 4. At this moment, your gear box will only change in between gear 1-4 and not going to 5 or 6.

As you mention, our gear box response is a bit slow. This is not only happen in your car and expected could be Toyota's setup or I will treat it as design problem. If you want to accelerate faster, you better to shift down manually or you can press the PWR button and help a bit. Once you press the power button the gear box response improve a bit and change gear in higher res.
 樓主| 發表於 16-7-2015 23:50:01 來自手機 | 顯示全部樓層
Well, it's really a bit awkward to me as I have never come across a sequential gear box setting like this, which I think is really stupid, although I like most of the other things of the car.
 樓主| 發表於 16-7-2015 23:51:24 來自手機 | 顯示全部樓層
Anyway, thanks for telling me this!
發表於 17-7-2015 06:32:23 | 顯示全部樓層
JoeY 發表於 16-7-2015 14:48
Hi, Welcome to join our forum.

Actually the Mark X gear box is a full auto gear box with +/- change ...

Model answer
發表於 17-7-2015 09:50:54 | 顯示全部樓層
ClarenceChi@FB 發表於 16-7-2015 23:50
Well, it's really a bit awkward to me as I have never come across a sequential gear box setting like ...

It is better in 130 models
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|手機版|Mark X Owners' Club

GMT+8, 7-12-2019 13:14 , Processed in 0.075707 second(s), 18 queries .

Powered by Discuz! X3.2

© 2001-2012 Comsenz Inc.Design by singcere.net, 5qwan.com

返回頂部